|
Climbed this route with Martin yesterday.
The final belay before the cave had a tray sized block perched 3m above it. I managed to carry/slide it down to a ledge below the belay but there is still some loose rock in place that could be dislodged when climbing or pulling your ropes whilst rappelling.
Also - the final bolt hanger on the long traverse pitch into the corner system has been hit by rockfall and bent over. You can still clip it but it would be good if it could be replaced sometime.
Cheers,
Steve Blagbrough.
|
_______________________________________________
These observations and opinions are those of the person who submitted them. The
ACMG and its members take no responsibility for errors, omissions, or lapses in
continuity. Conditions differ greatly over time and space due to the variable
nature of mountain weather and terrain. Application of this information
provides no guarantee of increased safety. Do not use the Mountain Conditions
Report as the sole factor in planning trips or making decisions in the field.
See http://acmg.ca/mcr for more information.
See http://informalex.org/subscribe.shtml#unsubscribe to remove your name from
this list.
|